Light Bond Economy Sealant With Fluoride 7cc

Light Bond Economy Sealant With Fluoride 7cc

Light Bond Economy Sealant With Fluoride 7cc is a dental sealant that is used to protect the chewing surfaces of teeth from decay. It is a clear, resin-based material that is applied to the teeth and then cured with a blue light. The sealant forms a barrier that prevents food and bacteria from getting into the grooves and pits of the teeth, where decay can start.

Features:

• Clear, resin-based material
• Forms a barrier against decay
• Contains fluoride for added protection
• Available in a 7cc syringe

Benefits:

• Helps to prevent decay
• Provides a smooth surface for chewing
• Contains fluoride for added protection
• Easy to apply

How to Use:

Light Bond Economy Sealant With Fluoride 7cc is typically applied by a dentist or dental hygienist. The teeth are first cleaned and then the sealant is applied. The sealant is then cured with a blue light. The entire procedure takes about 15 minutes.

Safety Precautions:

• Light Bond Economy Sealant With Fluoride 7cc is generally safe for most people. However, it is important to follow the instructions of your dentist or dental hygienist carefully.
• If you have any allergies or sensitivities, be sure to let your dentist or dental hygienist know before the sealant is applied.

Conclusion:

Light Bond Economy Sealant With Fluoride 7cc is a valuable tool for preventing decay. It is easy to apply and provides a smooth surface for chewing. If you are concerned about decay, talk to your dentist or dental hygienist about getting a sealant.

Additional Information:

• Light Bond Economy Sealant With Fluoride 7cc is typically covered by dental insurance.
• It is important to have the sealant reapplied every 5-7 years.
• Light Bond Economy Sealant With Fluoride 7cc is available in a variety of colors.

Light Bond Economy Sealant With Fluoride 7 cc

INDICATIONS FOR USE:
Light Bond™ sealants are intended for use as a light cure sealant resin for bonding under an orthodontic adhesive.

INSTRUCTIONS FOR USE:
Dispense one to two drops of Light Bond sealant resin onto a mixing pad. With a brush, apply a thin, uniform layer of sealant to the etched enamel. It is not necessary to cure the sealant at this time, however, a cured sealant can prevent bracket floatation. To further enhance bond strength with some fine mesh brackets, a thin coat of sealant can be painted on the metal bracket base. Cure the sealant for 10 seconds before applying adhesive to the bracket base.

TEMPERATURE LIMITATION: Store at room temperature (15-30 ◦C / Not to exceed 86 ◦ F°) or can be refrigerated (2-8◦C/ 36-46◦ F°).